File Extension/Formatting: The Offline Controller will process a file regardless of the file extension but it must contain only valid G-Code with each line separated by a CR/LF (Carriage Return/Line Feed) Files generated by some software only separates the lines of G-Code by a single Line Feed character, before using they must be converted to standard files using a CR/LF sequence to separate each line.File Names: While files with long names are supported, please note that only 19 characters, including the extension, will be displayed on the offline controller.NOTE : The router cannot be connected to the Offline Controller and by a USB cable at the same time! Before connecting the Offline Controller disconnect the USB cable from the router and vice versa. Connect the router to the 24V external power supply and turn it on. Plug the cable into the offline controller and the Router motherboard. The offline controller is powered from the Router Motherboard, no batteries or other power supply is needed. To get files from your computer, must take your offline controller, and load files onto its internal storage by connecting it to your PC via USB. and to send the contents of the files directly to the router without needing a PC connected to it via a USB cable. Through use of your offline controller you can control the router, move to and set the home, origin position etc. Sold as part of a bundle or separately for the Genmitsu 3018 Pro, an offline controller can be used as an alternative to the traditional method of operating your GRBL based CNC through your computer. Genmitsu 3018 Pro Offline Controller Guide
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |